Installing a performance clutch in your Nissan GT-R can significantly improve your vehicle's acceleration and overall driving experience. This guide provides step-by-step instructions to help you perform the installation safely and effectively.

Tools and Parts Needed

  • Performance clutch kit (including pressure plate, disc, and release bearing)
  • Socket set and wrenches
  • Jack and jack stands
  • Screwdrivers
  • Clutch alignment tool
  • Brake cleaner
  • Transmission fluid
  • Safety gloves and goggles

Preparation Steps

Before starting, ensure the vehicle is parked on a flat surface. Engage the parking brake and disconnect the negative battery terminal. Lift the front of the car using a jack and secure it with jack stands for safety.

Removing the Old Clutch

Drain the transmission fluid and remove the undercarriage panels if necessary. Disconnect the driveshaft and transmission linkage. Carefully unbolt the transmission from the engine and slide it back to access the clutch assembly. Use the clutch alignment tool to remove the old clutch disc and pressure plate.

Installing the Performance Clutch

Clean the flywheel surface with brake cleaner to remove any debris or oil. Align the new clutch disc using the clutch alignment tool, then attach the new pressure plate. Tighten the bolts in a crisscross pattern to ensure even pressure. Reinstall the transmission, driveshaft, and reconnect all linkages.

Final Steps and Testing

Refill the transmission with fresh fluid and reconnect the battery. Lower the vehicle and start the engine. Test the clutch engagement and listen for any unusual noises. Take the car for a short drive to ensure smooth operation and proper clutch function.

Safety Tips

  • Always wear safety gloves and goggles.
  • Use jack stands, not just a jack, to support the vehicle.
  • Work in a well-ventilated area.
  • If unsure, consult a professional mechanic.