Step-by-step Guide to Replacing or Repairing the Nissan Around View Monitor Components

by

The Nissan Around View Monitor (AVM) is an advanced technology that provides a 360-degree view of the area surrounding your vehicle. This system can greatly enhance parking and maneuvering capabilities, but like any technology, it may require maintenance or replacement over time. This guide will walk you through the steps to replace or repair the components of the Nissan Around View Monitor.

Understanding the Components of the Around View Monitor

Before diving into the repair or replacement process, it’s essential to understand the main components of the Nissan Around View Monitor:

  • Front Camera
  • Rear Camera
  • Side Cameras
  • AVM Control Unit
  • Display Screen

Tools and Materials Needed

Gather the following tools and materials before starting the repair or replacement process:

  • Screwdriver Set
  • Socket Wrench Set
  • Trim Removal Tool
  • Replacement Cameras (if needed)
  • AVM Control Unit (if needed)
  • Wiring Harness (if needed)

Step 1: Diagnosing the Issue

Before replacing any components, it’s crucial to diagnose the issue with the Around View Monitor. Here are some common symptoms:

  • Blank display screen
  • Distorted images from the cameras
  • Camera not functioning
  • Error messages on the display

Step 2: Accessing the Components

To access the cameras and control unit, follow these steps:

  • Park the vehicle on a flat surface and turn off the ignition.
  • Disconnect the negative battery terminal to ensure safety.
  • Use the trim removal tool to gently remove the trim around the display screen.
  • Unscrew and detach the display screen from the dashboard.
  • Locate the AVM control unit, usually found behind the screen or in the dashboard area.

Step 3: Replacing or Repairing the Cameras

If you have determined that one or more cameras are faulty, follow these steps to replace them:

  • Identify the faulty camera (front, rear, or side).
  • Disconnect the wiring harness from the camera.
  • Remove the camera from its mounting location.
  • Install the new camera by reversing the removal steps.
  • Reconnect the wiring harness to the new camera.

Step 4: Replacing the AVM Control Unit

If the control unit is malfunctioning, follow these steps to replace it:

  • Locate the AVM control unit behind the display screen.
  • Disconnect all wiring harnesses attached to the control unit.
  • Unscrew the control unit from its mounting position.
  • Install the new AVM control unit by reversing the removal steps.
  • Reconnect all wiring harnesses to the new control unit.

Step 5: Reassembling the Dashboard

After replacing or repairing the necessary components, it’s time to reassemble the dashboard:

  • Reattach the display screen to the dashboard and secure it with screws.
  • Carefully snap the trim back into place around the display.
  • Reconnect the negative battery terminal.

Step 6: Testing the System

Once everything is reassembled, it’s essential to test the Around View Monitor system:

  • Start the vehicle and turn on the ignition.
  • Check the display screen for any error messages.
  • Test each camera by engaging the vehicle in reverse and checking the views.
  • Ensure the 360-degree view is functioning correctly.

Conclusion

Replacing or repairing the Nissan Around View Monitor components can be a straightforward process if you follow the steps outlined in this guide. Regular maintenance and timely repairs can help ensure that this valuable technology continues to enhance your driving experience.